Transition Coupling for HDPE-to-Steel Pipe STYLE 907 and STYLE W907
•Designed to provide a single transition from plain
end HDPE pipe (SDR 7 – SDR 26) to grooved steel
sized piping system components
• Sizes from 2 – 14" IPS HDPE to 2 – 14" |
DN50 – DN350 IPS grooved steel
• Sizes from 63 – 355 mm ISO HDPE to 2 – 14" |
DN50 – DN350 ISO grooved steel
• Pressure rating meets or exceeds the performance
capability of the pipe
Enquiry Here
Diverter Valve SERIES 725S
•Intended for backfill and flush water diversion
in backfill mining operations
• May be operated under pressure to dump backfill
in the event of a blockage
• Stainless steel wetted surfaces
• Manual, hydraulic, pneumatic, and electric
actuation available
• Available in 4 – 8" | DN100 – DN200
• Pressures up to 1500 psi | 10342 kPa | 103 bar
Enquiry Here
VIC-300™ MASTERSEAL™ SERIES 761 BUTTERFLY VALVE
•Designed for bi-directional, dead-end services to full working pressure
• Available without handle, with gear operator, with lever lock handle and memory
stop or with 10-position handle and memory stop
• Sizes from 2 – 12″ |DN50 – DN300
• Pressures up to 300 psi | 2068 kPa | 21 bar
Enquiry Here
Victaulic® Knife Gate Valve Series 795
•3 – 12"/DN80 – DN300
• Rated from full vacuum (29" of Hg/33.4 kPa) to 150psi/1035 kPa/10 bar
for unidirectional services
• Designed for fluid lines containing solids and abrasive material
• Intended for use in on-off service (no throttling)
• Offers shutoff isolation without expelling media from the bottom of the valve
• Knife, seat and packing can be replaced without removing valve from pipeline
• Features a unidirectional polyurethane seat
• Lower housing includes a flush port for cleaning out the valve during maintenance
• Hand wheel (3 – 8"/DN80 – DN200)
• Bevel gear (10 – 12"/DN250 – DN300)
• Pneumatic cylinder
• Hydraulic cylinder
• Multi-turn electric actuator
• Joins OGS Grooved Carbon Steel and Stainless Steel pipe